Ou Ruikang Displays A Variety Of Nonwovens Equipment And Technology

"P", at the INDEX nonwovens exhibition held in Geneva, Switzerland, oryn newmager has displayed many new high quality nonwovens new equipment and technology for producing new Staple equipment, such as Staple FORCE S 1000, which is suitable for health and industry.

< /p >

< p > at present, the annual growth rate of nonwovens polyester, polypropylene and two-component chemical fibers in the global market is about 5% annually.

At this rate, by 2015, the total demand for fibre will only be 3 million 200 thousand tons.

These materials are mainly used in civil engineering geotextiles, filter materials, automotive industry insulation and internal materials, and a large number of special products.

< /p >

< p > the demand characteristics of the market at present are that it can meet the requirements of small batch production orders, deliver goods in a short time, and produce products with high cost-effectiveness.

At present, these requirements are hard to satisfy at the same time.

"Short fiber" a href= "//www.sjfzxm.com/news/index_c.asp" > FORCE S 1000 < /a > pays more attention to daily output and cost-effective production. With this set of equipment, we can narrow the gap between demand and actual supply.

< /p >

< p > at the same time, we integrate the production of < a href= "//www.sjfzxm.com/news/index_c.asp" > fiber < /a > into daily operation, so that downstream manufacturers can better coordinate product development and improve quality management.

"CEO Stefan Kross," said the company's chemical fiber division.

< /p >

< p > this < a href= "//www.sjfzxm.com/news/index_c.asp" > short fiber < /a > Force S 1000, the operation of the device is simple and fast (FORCE represents "Fibers on Request on", that is to produce fiber on demand and the project is compact).

Compared with the traditional production line, the system greatly reduces the product conversion time, thus significantly reducing the waste.

For the one-step process, the system has reached an unprecedented speed of 1000 meters per minute.

< /p >

In order to achieve this production speed, orrican newmager has revised a stretching process that has been successfully applied in carpet yarn factory for many years, reducing steam and water bath step in order to achieve this production speed. < p >

The new process has greatly reduced energy and water consumption, saving both cost and environment.

At the same time, this highly compact device only needs 450 square meters of floor space. It can be installed on the standard industrial floor without special equipment foundation, and the additional investment cost has also been reduced to a minimum.

< /p >

At the P INDEX nonwovens exhibition, oryn newmager also displayed a complete set of technology for producing asphalt roofing waterproofing, roofing liner and geotextiles, from polymer chips to rolls.

This one-stop spunbonded technology can reduce production costs by up to 20%.

The fusion melted non-woven technology of oryn newmager makes the high quality melt blown nonwoven fabric and SMS (composite nonwoven) products more cost-effective and productive advantages.

< /p >

< p > non-woven fabrics produced by separate use and interconnected melted nonwovens can be applied to produce various kinds of filtration, insulation and adsorption products.

Melt blown nonwovens technology can be installed in existing and new SXS factories in plug and play mode. Melt spinning nonwovens are mainly used in many fields such as medicine and hygiene.

< /p >

< p > the core of oryn newmager air laid nonwovens technology is the forming die, which sets the industry standard for the production of extremely thin airflow netting nonwovens.

The new forming die can not only produce very thin air woven nonwoven material, but also make full use of the production capacity of the equipment. It can not only produce different kinds of nonwovens, but also achieve the purpose of saving raw materials.

< /p >